20G331-1:混凝土异形柱结构构造

       本图集适用于设计使用年限为 50 年,抗震设防烈度为 6 度、 7 度及 8 度地区的一般居住建筑混凝土异形柱结构的设计与施工。本图集所示的混凝土异形柱是指截面几何形状为 L 形、 T 形、十字形和 Z 形,且截面各肢的肢高与肢厚之比不大于 4 的混凝土柱。

20G108-3:《钢结构设计标准》图示

        本图集是国家标准《钢结构设计标准》GB 50017-2017的配套图集。针对该标准的重点、难点条文以图、表、文字相结合的方式,对其内涵进行挖掘,对其脉络进行梳理,对其应用进行指引。把《钢结构设计标准》以多维的视角、合理的延伸展现出来,作为标准的配合资料,并适当给出了与上一版《钢结构设计规范》、《建筑抗震设计规范》等联系密切的规范,对其规定的理解和应用给出合理建议。

广告位

19G518-3:门式刚架轻型房屋钢结构(有吊车)

       本图集适用于门式刚架跨度为12米、15米、18米、21米、24米、27米和30米,柱距为6米、7.5米和9米有梁式或桥式吊车,轻型屋面和轻型外墙的单层封闭房屋。适用于抗震设防烈度为8度(0.2g)及以下地区,设计地震分组为第一、二组,Ⅰ、Ⅱ和Ⅲ类场地。抗震设防为丙类建筑。

17G325:吊车轨道联结及车挡(适用于混凝土结构)

       本图集是在04G325图集的基础上,为便于设计、施工人员的使用,按现行国家标准规范和技术进行了统一、精简、优化编制的。

17G101-11:G101系列图集常见问题答疑图解

        本图集是对13G101-11《G101系列图集施工常见问题答疑图解》的修编。本次修编针对16G101系列图集,根据G101系列图集在使用过程中提出的反馈意见,对于施工中出现的常见问题,结合近年来工程实践经验,对图集原有内容进行了系统的梳理、修订,同时对设计也提出了相应的建议和要求,更加适应实际工程的需要。

17G536:钢结构停车楼(坡道式)

        本图集适用于抗震设防烈度为6到8度,设计地震分组第一组、第二组,场地类别为I、II、III类地区的多层四面开敞式钢结构停车楼。主要编制了几种常用的坡道式停车楼的布置形式、结构设计图和适量的建筑示意图。对停车楼这一功能单一且形式相对固定,建筑功能等级要求不高的建筑物进行了较为全面的设计示范。特点:为设计者提供了从布置到建筑设计,从结构体系布置到构件选用以及节点连接设计的全面的参考样本。以便设计、施工、监理等能够正确理解、把握规范,提高此类结构的质量、经济性和工作效率。

17G337:吊车梁走道板

       本图集是在04G337《吊车梁走道板》图集的基础上,为便于设计、施工人员的使用,按现行国家标准规范和技术进行了统一、精简、优化修编的。

B16G101-3:中英文双语版16G101-3

16G101-3 Drawing Rules and Standard Detailing Drawings of Ichnographic Representing Method for Construction Drawings of R.C. Structures (Spread footings, strip foundations, raft foundations and pile foundations) is the revised version of 11G101-3 Drawing Rules and Standard Detailing Drawings of Ichnographic Representing Method for Construction Drawings of R.C. Structures (Spread footings, strip foundations, raft foundations and pile foundations). According to the updated versions of codes GB 18306-2015 Seismic ground motion parameters zonation map of China, GB 50011-2010 Code for seismic design of buildings and its partial revision in 2016 and GB 50010-2010 Code for design of concrete structures (2015 version) et al., considering feedbacks from engineering practice and need of practical projects in recent years, contents in the drawing collection have been systematically revised, and details of cast-in-place concrete piles are included in this version.

B16G101-2:中英文双语版16G101-2

16G101-2 Drawing Rules and Standard Detailing Drawings of Ichnographic Representing Method for Construction Drawings of R.C. Structures (Cast-in-situ concrete slab-stairs) is the revised version of 11G101-2 Drawing Rules and Standard Detailing Drawings of Ichnographic Representing Method for Construction Drawings of R.C. Structures (Cast-in-situ concrete slab-stairs). According to the updated codes GB 18306-2015 Seismic ground motion parameters zonation map of China, GB 50011-2010 Code for seismic design of buildings and its partial revision in 2016 and GB 50010-2010 Code for design of concrete structures (2015 version) et al., considering feedbacks from engineering practice in recent years, contents in the drawing collection have been systematically revised, and details of CTa and CTb stairs with slide bearings, of which the stair slab consists of flight and upper landing slab, are included in this version.

B16G101-1:中英文双语版16G101-1

16G101-1 Drawing Rules and Standard Detailing Drawings of Ichnographic Representing Method for Construction Drawings of R.C. Structures (Cast-in-situ R.C. frames, shear walls, beams and slabs) is the revised version of 11G101-1 Drawing Rules and Standard Detailing Drawings of Ichnographic Representing Method for Construction Drawings of R.C. Structures (Cast-in-situ R.C. frames, shear walls, beams and slabs). According to the updated versions of codes GB 18306-2015 Seismic Ground Motion Parameters Zonation Map of China, GB50011-2010 Code for Seismic Design of Buildings and its partial revision in 2016 and GB50010-2010 Code for Design of Concrete Structures (2015 version) et al., considering feedbacks from engineering practice and need of practical projects in recent years, contents in the drawing collection have been systematically revised, and details of frame flat beams are included in this version.

联系我们

联系我们

在线咨询: QQ交谈

邮箱: web@lizi.tw

工作时间:周一至周五,9:00-17:30,节假日休息

返回顶部